Programación de Plc Allen Bradley

Contexto general del proyecto

Sequence of Operation Op.25 Harness to Cover Crimping. • Operator get Fuel Pump Harness. • Operator loads Fuel Pump Harness on lower machine nest. • Operator get maaps fls. • Operator loads maaps fls on lower machine nest. • Operator get the Cover flange • Operator loads the Cover flange on upper machine nest. • Operator activates auto cycle. • Machine verifies: o Not interrupted safety light curtains. O Correct tooling installed. Full loaded Fuel Pump harness Correct Color & Correct position & Correct orientation & Correct part. O Full loaded maaps fls harness correct color & correct position & correct orientation & correct part. O Full loaded Cover Flange /Correct position & Correct orientation & Correct part & Witness Mark. • Machine rotate table to next station only if all conditions are passed. • Machine press the cover flange until the wires are correctly inserted and terminals are closed. • Machine verifies: o Displacement parameter for wires insertion (or for terminals and wires tolerances) press. O Verify All Terminals to segregate bend or damaged condition. O If displacement parameter fails, reject routine o If not correct wires inserted, reject routine o If correct machine press the wires into the terminals. • Machine marks and release the part if part is good condition. • If cycle not completely performed reject routine. • If Displacement parameter fails save the part information in the machine and in the server as bad part and reject routine. • If light curtains interrupt, reject routine. • Reject routine o Machine request Reset button. O Machine release the bad part. O Reject Shute will ask for the part loaded. O Reject Shute verifies the bad part presence, ones that the part was confirm that was a bad part a gate will be open to automatically drop the part and save it to prevent that the part can be moved to the next station. O Confirmed part on Shute. • Machine will not cycle next part if previous steps not followed.

Categoría Programación y Tecnología
Subcategoría Inteligencia Artificial
Tamaño del proyecto Medio
¿Es un proyecto o una posición? Un proyecto
Disponibilidad requerida Según se necesite

Plazo de Entrega: 08 Junio, 2024

Habilidades necesarias